Cars
#39 Restoration 1992 Mitsubishi Jeep J53 Completed & Vehicle Inspection
Restoration was completed, and I passed the vehicle inspection. It wasn’t easy to get this far, but I managed to
Mitsubishi Jeep J53
- Cars
#38 Repairing the RECARO Seat
Removing the seat, tt ’s just two bolts. This is the toolbox under the driver’s seat. how many years did
- Cars
#37 Vinyl Window Replacement
Washing with water, as usual. Removing the temporary tapes. I cut the old window sheet with a cutter, leaving the
- Cars
#36 Painting the Parts
Removing rust with the Bevel Black. Applying the 101P with a brush. The Jeep emblem was uneven, so I scraped
- Cars
#35 Painting the Roll Bar
Of course, some bolts were stuck with rust, so I had to cut them off. After removing the roll bar
- Cars
#34 Making a Tailgate
As you can see, the original tailgate has become unusable due to rust. So I tried to make it with
- Cars
#33 Front Fender Repairing Part 4
I removed the old rubber gasket, and the blinker. Washing with water. Shaving the hole for the blinker with a
- Cars
#32 Steering Damper Replacement
It was easy to remove, just loosen two bolts. That is a new RANCHO RS5404. It’s clean! The bushing wasn’t
- Cars
#31 Rust Prevention & Painting of the Frame
Look at that mess! First, I cleaned up and then apply the 101P. After drying, the area around the engine
- Cars
#30 Body Repairing Part 4
There was a big crack at the mounting hole, so I put the aluminum putty. Thin putty applying. The right
