HomeModelsSuzuki

Japan-market model file

Suzuki DR250 SHC

The DR250 in the videos on this site is the height-adjustable SHC: an early-1990s bike with an inverted fork, a carburetor, and adjustable rear ride height. That description matches the SJ44A DR250S family in Suzuki's library, not the 1982 DR250S (SJ41A) and not the 1995 DR250R (SJ45A). The figures below are the SJ44A rows in that library.

スズキ DR250SHC

MotorcycleJapan-market modelChecked November 9, 2026

Three-quarter view of a yellow Suzuki DR250S of the early-1990s DR250SH generation
Photo: 20091027N / CC BY-SA 4.0
Production
1990–1994
Codes
SJ44A, J418
Where it was sold
A Japanese domestic dual-sport. Suzuki's library lists the SJ44A among its Japan specifications for 1992–1994, and a 1990 DR250SH catalog entry uses the same frame code. The 1995 model in that library is the DR250R, frame SJ45A.

Import age

Computed from the production range on this page and the official age rules. The date that matters is the manufacture date of the individual vehicle. Checked November 9, 2026.

United States, 25 years

Every manufacture date in the recorded run is past the 25-year mark for United States. The earliest reaches it in 2015, in the month it was built, and the latest in 2019, in the month it was built.

NHTSA says a motor vehicle that is at least 25 years old can be imported without regard to the Federal motor vehicle safety standards. The clock runs from the date of manufacture, not the model year. This is not a registration ruling, and it is not legal advice.

Canada, 15 years

Every manufacture date in the recorded run is past the 15-year mark for Canada. The earliest reaches it in 2005, in the month it was built, and the latest in 2009, in the month it was built.

Transport Canada treats vehicles 15 years old or older, except buses, as non-regulated at import. A completed import does not guarantee that a province or territory will register the vehicle. Right-hand drive can be refused locally. This is not legal advice.

Specifications

EngineJ418, 249 cc oil-cooled single, SOHC, 4 valves
Bore x stroke73.0 x 59.6 mm
Compression10.1:1
Power29 ps at 8,500 rpm
Torque2.5 kgf·m at 7,000 rpm
Fuel systemBST33 carburetor
LubricationDry sump, 2.3 L
Transmission6-speed, chain final drive
FrameSemi-double cradle. Caster 27°30', trail 113 mm
BrakesHydraulic single disc front and rear
Front tire80/100-21 51P
Rear tire110/90-18 61P
Dimensions1992–1994 rows: 2,230 x 885 x 1,255 mm. Wheelbase 1,440 mm. Ground clearance 285 mm
Seat height880 mm on the standard row. The height-adjust listing in the same table is HI 870 mm and LOW 825 mm
Dry weight117 kg, with 128 kg printed beside it for the heavier grade in the 1992–1993 rows. The 1994 DR250SHE row is 128 kg
Fuel tank9.0 L

Model codes

  • SJ44A. Frame code Suzuki's library prints for the DR250S, DR250SH, and DR250SHE through 1994.
  • J418. Engine code in the same SJ44A rows.

Japan specification

  • The library's 1995 row changes the name to DR250R and the frame code to SJ45A: a different engine family (J425), a wet sump, and a lower seat. Do not order SJ45A parts for an SJ44A bike, or the other way around.
  • The bike on this site is described by its owner as early 1990s, with an inverted fork and adjustable rear ride height, and the detail video is titled DR250 SHC. A 1990 DR250SH catalog page uses frame SJ44A for that height-adjust grade.

Common issues

  • The carburetor on the bike here was dirty enough to need a full clean: float bowl, main jet, slow jet, and pilot screw. That is one bike's carburetor, not a recall.
  • The stock muffler on the same bike was rusty at about 25,000 km and was replaced. The owner had not confirmed the model year at the time.

Maintenance

  • Engine oil quantity in the SJ44A library row is 2.3 L, dry sump. A viscosity is not printed in the table used here, so none is stated.
  • A parts listing for the 1991–94 DR250SH (SJ44A) gives a 520 chain, 112 links, and spark plug DPR9EA-9. Treat that as a catalog line to check against the frame number, not as a figure from Suzuki's library.
  • During the carburetor clean on this site, the jet-needle clip was moved from the 2nd groove to the 3rd to richen the mixture. That was the owner's choice on that bike, not a factory setting copied from a manual.

Parts and tools for this model

As an Amazon Associate, Galapagos Japan earns from qualifying purchases. These are sizes and part numbers for this model. Check the listing against your own vehicle before you buy.

  • Search 80/100-21 51P front tires amazon.com

    Library size for the SJ44A front wheel. No ASIN is linked: the load and speed indexes have to read 51P, or better, and these wheels of this era are typically tube-type. Confirm on the sidewall of the tire you take off.

  • Search 110/90-18 61P rear tires amazon.com

    Library size for the SJ44A rear wheel. Same caution as the front: match 61P and confirm tube-type before you buy a named listing.

  • Search 520 x 112 chain amazon.com

    A 1991–94 DR250SH parts listing gives pitch 520 and 112 links. Count the chain on the bike. The library table does not print the chain size.

Finding parts in Japanese

  • スズキ DR250SHC
  • DR250SH
  • DR250SHE
  • DR250S
  • 型式 SJ44A
  • エンジン J418
  • DR250 パーツ
  • On Yahoo Auctions Japan, search SJ44A together with DR250SH or DR250S. SJ45A is the later DR250R and a lot of the engine parts do not carry over.
  • The frame number prefix to look for is SJ44A. The library also prints the grade names DR250S, DR250SH, and DR250SHE against that one code.

On this site

Open the existing archive

On the Galapagos Japan channel

Published by Galapagos Japan.