Cars
#33 Front Fender Repairing Part 4
I removed the old rubber gasket, and the blinker. Washing with water. Shaving the hole for the blinker with a
restoration
- Cars
#32 Steering Damper Replacement
It was easy to remove, just loosen two bolts. That is a new RANCHO RS5404. It’s clean! The bushing wasn’t
- Cars
#31 Rust Prevention & Painting of the Frame
Look at that mess! First, I cleaned up and then apply the 101P. After drying, the area around the engine
- Cars
#30 Body Repairing Part 4
There was a big crack at the mounting hole, so I put the aluminum putty. Thin putty applying. The right
- Cars
#29 Shock Absorber Replacement
Originally it had a Rancho RS9000. Front Right Side. Rear shock absorbers. Some of shock bushings were missing. The bush
- Cars
#28 Tail Lamp Repairing
There was mud in the lamp. Oh… I removed the tail lamps. Some of them were scraped, so I did
- Mitsubishi Jeep J53
#27 Front Fender Repairing Part 3
After puttying, I painted the front fender with 120AL. Filing again. Painting again. This is the original blinker. I thought
- Cars
#26 Windshield Repairing
I removed the sticker first. It was hard to remove, so I used a dryer. Then I removed the windshield
- Cars
#25 Exhaust Repairing Part 2
The old pipe rotted and was unusable, so I decided to make a new one. This is my idea which
- Cars
#24 Repairing & Painting the Hood
It was heavy but easy to remove the hood alone. First of all, I removed some rust with files. Washed
